LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Automatic Transmission Servicing) >> Removal & Installation >> THERMO Element (4T65-E) >> Removal

THERMO Element (4T65-E): Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. See DRAINING & REFILLING (4T65-E)  under LUBRICATION.
  2. Remove the thermo element pins and washers (120 and 123). See Fig 1 .
  3. Remove the thermo element (121) and the thermo element plate (122).
Fig 1: Removing & Installing Thermo Element
G00087726Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals