LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Automatic Transmission Servicing) >> Removal & Installation >> Scavenge Screens & Seals (4T80-E) >> Installation

Scavenge Screens & Seals (4T80-E): Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new left and right scavenge seals.
  2. Install the new left and right scavenge screens. See Figure .
  3. Install the bottom pan, seal, and bolts. Finger-tighten the bolts.
  4. Tighten the pan bolts 3 times to the proper specification, in the sequence shown. Lower the vehicle. Fill transaxle with appropriate fluid to proper level. See LUBRICATION  .
scientia non olet · About LEMON Manuals