LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 587 (Exterior Trim) >> Repair Instructions >> Molding Replacement - Liftgate Lower >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the rear life gate.
    Fig 1: View Of Open Lift Gate
    GM851569Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws from the lift gate lower molding.
  3. Remove the lower molding from the lift gate.
    Fig 2: Identifying Lift Gate Lower Molding
    GM851574Courtesy of GENERAL MOTORS CORP.