LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 587 (Exterior Trim) >> Repair Instructions >> Decal and Stripe Replacement >> Stripe or Decal Removal

Stripe or Decal Removal

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the following components:
    • Necessary moldings or trim panel
    • Molding attaching clips
    • Handles
    • Sidemarker lamps
    • Other stripe or decal overlapping parts
  2. Clean the following areas as needed:
    • The repair surfaces
    • The adjacent panels
    • The openings
  3. Use 3M™ ScotchBrite molding adhesive remover disk 3M™ P/N 07501 or equivalent in order to remove the stripe or decal from the body panel.
  4. Use Varnish Makers and Painters (VM&P) naphtha in order to remove all traces of adhesive residue from the painted surfaces.
scientia non olet · About LEMON Manuals