LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 586 (Body Front End) >> Repair Instructions >> Hood Latch Release Handle Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left IP Insulator Panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gauges, and Console.
  2. Remove the knee bolster panel. Refer to Knee Bolster Replacement in Instrument Panel, Gauges, and Console.
  3. Remove the bolts from the hood release handle base.
    Fig 1: Hood Release Handle Base
    GM182644Courtesy of GENERAL MOTORS CORP.
  4. Remove the hood release cable from the hood release handle.
    Fig 2: Locating Hood Release Handle
    GM630479Courtesy of GENERAL MOTORS CORP.
  5. Remove the hood release handle from the instrument panel.
scientia non olet · About LEMON Manuals