LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 579 (Seat System) >> Repair Instructions >> Seat Replacement - Rear Bucket >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the rear seat to the anchor plates.
  2. Fig 1: Identifying Rear Bucket Seat Components
    GM756348Courtesy of GENERAL MOTORS CORP.
  3. Install the front seat adjuster latches into the anchor plate.

    Ensure that the latch is hooked on both pins.

  4. Tilt the rear seat assembly down and latch the rear seat adjusters into the floor.
  5. Place the rear seat to the original position.