LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 579 (Seat System) >> Repair Instructions >> Seat Cushion Frame Replacement - Rear (Bucket) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Right J-Hook Retainers On Right Side Of Cushion
    GM756401Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear bucket seat from the vehicle. Refer to Seat Replacement - Rear Bucket .
  2. Remove the seat back from the rear seat. Refer to Seat Back Replacement - Rear (Split Bench)  or Seat Back Replacement - Rear (Bucket) .
  3. Remove the rear seat adjuster. Refer to Seat Adjuster Replacement - Rear (Split Bench) .
    4. IMPORTANT: Remove the cushion cover and the cushion as one piece.
  4. Remove the cushion cover and the rear seat cushion. Refer to Seat Cushion Cover Replacement - Rear (Bucket)  or Seat Cushion Cover Replacement - Rear (Split Bench) .
  5. Remove the rear seat cushion from the rear seat frame. Refer to Seat Cushion Replacement - Rear (Bucket)  or Seat Cushion Replacement - Rear (Split Bench) .
scientia non olet · About LEMON Manuals