Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Rear Seat Cushion Cover

Courtesy of GENERAL MOTORS CORP.

Place the rear seat cushion cover to the rear seat cushion.

Fig 2: Identifying Hog Rings In Rear Seat Cushion Cover

Courtesy of GENERAL MOTORS CORP.

Install the rear seat cushion cover to the rear seat cushion with hog rings.

Fig 3: View Of Rear Seat Cushion Cover

Courtesy of GENERAL MOTORS CORP.

Install the rear seat cushion cover to the rear seat cushion.

Fig 4: Identifying Hog Rings On Rear Seat Cushion Cover

Courtesy of GENERAL MOTORS CORP.

Install the hog rings to the rear seat cushion cover.

Fig 5: View Of Hog Rings

Courtesy of GENERAL MOTORS CORP.

Install the hog rings to the rear seat belt area.

Fig 6: Locating Rear Center J-Hook Retainers

Courtesy of GENERAL MOTORS CORP.

Install the J-hook retainers on the rear center of the rear seat cushion cover.

Fig 7: Identifying Left Rear J-Hook Retainers

Courtesy of GENERAL MOTORS CORP.

Install the J-hook retainers on the left rear edge of the rear seat cushion cover.

Fig 8: View Of Left J-Hook Retainers

Courtesy of GENERAL MOTORS CORP.

Install the J-hook retainers on the left side of the rear seat cushion cover.

Fig 9: Right J-Hook Retainers On Right Side Of Cushion

Courtesy of GENERAL MOTORS CORP.

Install the J-hook retainers on the right side of the rear seat cushion cover.
Install the rear seat back. Refer to Seat Back Replacement - Rear (Split Bench) or Seat Back Replacement - Rear (Bucket) .
Install the rear seat adjuster. Refer to Seat Adjuster Replacement - Rear (Split Bench) .
Install the rear split bench seat to the vehicle. Refer to Seat Replacement - Rear 50-50 Split .