LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 579 (Seat System) >> Repair Instructions >> Lumbar Replacement - Front Seat >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat. Refer to Seat Replacement - Bucket .
  2. Remove the front seat back cover. Refer to Seat Back Cover Replacement - Front .
  3. Remove the front seat back pad. Refer to Seat Back Pad Replacement - Front .
    4. IMPORTANT: The lumbar support must be in the relaxed position to remove the control cable.
    Fig 1: Identifying Lumbar Control Cable
    GM627458Courtesy of GENERAL MOTORS CORP.
  4. Remove the lumbar control cable from the lumbar control.
    5. Fig 2: Locating Identifying Seat Back Recliner Handle
    GM627466Courtesy of GENERAL MOTORS CORP.
  5. Remove the lumbar support from the front seat back by compressing the lumbar support push-in retainers.
    6. Fig 3: View Of Lumbar Support
    GM627469Courtesy of GENERAL MOTORS CORP.
  6. Remove the lumbar support from the front seat back.
scientia non olet · About LEMON Manuals