LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 576 (Body Rear End) >> Repair Instructions >> Lock Striker Replacement - Endgate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the endgate.
  2. Mark the location of the endgate strikers with a grease pencil.
  3. Remove the screws from the endgate strikers.
    Fig 1: View Of Endgate Striker Components
    GM621897Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Mark the endgate strikers and shims (RT or LT) for reinstallation.
  4. Remove the endgate strikers and shims from the vehicle.
scientia non olet · About LEMON Manuals