Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 .
- Remove the front bucket seat. Refer to Seat Replacement - Bucket in Seats.
- Remove the front seat belt anchor from the rear outboard stud.
- Open the seat belt guide loop cover.
- Remove the nut from seat belt guide loop.
- Remove the seat belt guide loop from the guide adjuster bracket.
- Remove the center pillar lower trim. Refer to Trim Panel Replacement - Lower Center Pillar in Interior Trim.
- Remove the bolt from the seat belt retractor.
- Remove the seat belt retractor from the center pillar.
- Remove the front seat belt from the vehicle.