LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Trim Plate Replacement - Instrument Panel (I/P) Accessory (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the floor shifter in the Drive position.
  2. Remove the front floor console. Refer to Trim Plate Replacement - Front Floor Console (Aztek)  or Trim Plate Replacement - Front Floor Console (Rendezvous) .
  3. Remove 2 screws from the lower trim plate.
    4. Fig 1: Identifying Lower Trim Plate Screws
    GM630977Courtesy of GENERAL MOTORS CORP.
  4. Remove the instrument panel (I/P) accessory trim plate by releasing the retainers.
scientia non olet · About LEMON Manuals