LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Trim Plate Replacement - Front Floor Console (Rendezvous) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift the armrest cover and place the cover in the locked position.
  2. Fig 1: View Of Cup Holder Liners
    GM1204114Courtesy of GENERAL MOTORS CORP.
  3. Remove the cup holder liners.
  4. Remove the cup holder screws.
  5. Remove the power accessory liner.
  6. Remove the liner screws.
  7. Disconnect the electrical connectors from the trim plate.
  8. Remove the trim plate assembly.