LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Rendezvous) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the knee bolster panel. Refer to Knee Bolster Replacement .
    2. Fig 1: View Of Trim Plate Bezel
    GM771732Courtesy of GENERAL MOTORS CORP.
  2. Remove the driver information center (DIC) switch from the trim plate bezel. Refer to Driver Information Center Switch Replacement (Rendezvous)  or Driver Information Center Switch Replacement (Aztek) .
  3. Loosen the steering column bracket. Lower the steering column.
  4. Remove the trim plate bezel from the instrument panel cluster.
scientia non olet · About LEMON Manuals