LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement (Rendezvous) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Ambient Air Temperature Gage Sensor
    GM785501Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Remove the clip from the hood latch.
  3. Disconnect the electrical connector from the sensor.
  4. Remove the ambient air temperature gage sensor from the electrical harness clip.