LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Ambient Air Temperature Gage Sensor
    GM785501Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the ambient air temperature gage sensor.
  2. Install the sensor to the electrical harness clip.
  3. Install the clip to the hood latch.
  4. Close the hood.
scientia non olet · About LEMON Manuals