LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 562 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Windshield Pillar >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Windshield Garnish Molding
    GM620963Courtesy of GENERAL MOTORS CORP.
  1. Remove the windshield garnish molding from the windshield pillar by pulling the windshield garnish molding to release the push-in retainers.
  2. Remove the windshield garnish molding from the windshield pillar.
scientia non olet · About LEMON Manuals