LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 562 (Interior Trim) >> Repair Instructions >> Door Sill Plate Replacement - Liftgate (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Liftgate Door Sill Plate
    GM786755Courtesy of GENERAL MOTORS CORP.
  1. Align the rear door sill plate and push in the retainers.
  2. Install the door sill plate by applying pressure to the tabs.
  3. Close the lift gate.