LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Rear (Crew Cab) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove 2 bolts securing the rear seat bottom to the floor.
  2. Carefully pull the rear seat bottom cushion ears to release retainers from the rear seat back mounting bracket.
  3. Remove the rear seat bottom cushion.
  4. Remove the rear seat belt buckle assembly retaining nuts.
  5. Remove the rear seat belt buckle assembly from the vehicle.
    Fig 1: Removing Rear Seat Belt Buckle Assembly (Crew Cab)
    G01478440Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals