LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 550 (Body Rear End) >> Repair Instructions >> Pressure Relief Valve Replacement (Pickup) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the pickup box. Refer to PICKUP BOX REPLACEMENT .
  2. Remove the pressure relief ventilation valve assembly.

    Use a flat-bladed tool in order to pry the valve out of the rear of the cab.

    Fig 1: Pressure Relief Valve
    G01478340Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals