LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 550 (Body Rear End) >> Repair Instructions >> Lock Cylinder Replacement - Lift Gate >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the liftgate lock cylinder to the liftgate.
  2. Install the clip that retains the liftgate lock cylinder to the liftgate.
  3. Connect the electrical connectors, as needed.
  4. Install the liftgate window latch support. Refer to LATCH SUPPORT REPLACEMENT - LIFT GATE WINDOW .
    Fig 1: Installing Liftgate Lock Cylinder To Liftgate
    G01478250Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals