LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Body Side (Standard Cab Pickup) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Feed the seat belt through the trim panel.
  2. Install the shoulder belt opening trim cover.
  3. Connect the electrical connectors, as needed.
  4. Install the body side trim panel to the vehicle.
  5. Install the upper and lower seat belt anchor bolts.
  6. Install the coat hook. Refer to COAT HOOK REPLACEMENT (EXTENDED/CREW CAB PICKUP)  or COAT HOOK REPLACEMENT (STANDARD CAB PICKUP)  or COAT HOOK REPLACEMENT (UTILITY) .
  7. Install the door sill trim plate. Refer to DOOR SILL PLATE REPLACEMENT .
    Fig 1: Installing Body Side Trim Panel To Vehicle
    G01478171Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals