LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Sunroof Panel Window (ZRX/EXTREME w/ CF5) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. With a medium flat-bladed tool, remove the service cover.
  2. Remove the motor/actuator trim cover screw (2).
    Fig 1: Motor/Actuator Trim Cover Screw
    G01478148Courtesy of GENERAL MOTORS CORP.
  3. Lower the motor/actuator trim cover and remove the sunroof switch (4) from the cover (5).
    Fig 2: Sunroof Switch
    G01478149Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 short screws (1,2) from the sunroof panel window garnish molding.
  5. Remove the 8 screw covers (3) from the lower sunroof panel window garnish molding.
    Fig 3: Garnish Molding
    G01478150Courtesy of GENERAL MOTORS CORP.
  6. Remove the 8 garnish molding screws.
  7. Remove the sunroof panel window garnish molding from the vehicle.
    Fig 4: Removing Sunroof Panel Window Garnish Molding From Vehicle
    G01478151Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals