LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Side Door Lock Pillar (CF5) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front and rear door sill trim plates. Refer to DOOR SILL PLATE REPLACEMENT .
  2. Remove the upper and lower front seat belt anchor bolts.
  3. Remove the front side door lock pillar garnish molding from the vehicle. Feed the seat belt through the garnish molding.
    Fig 1: Front Side Door Lock Pillar Garnish
    G01478144Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals