LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 547 (Door System, Mirror System & Window System) >> Repair Instructions >> Sealing Strip Replacement - Rear Door Window Belt Inner >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the side rear door trim panel. Refer to TRIM PANEL REPLACEMENT - SIDE REAR DOOR (UTILITY)  or TRIM PANEL REPLACEMENT - SIDE REAR DOOR (EXTENDED CAB P/U ONLY) .
  2. Remove the staples that secure the sealing strip to the trim panel.
  3. Remove the sealing strip.
    Fig 1: Removing Rear Door Window Belt Inner Sealing Strip From Trim Panel
    G01477794Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals