LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (Body Front End) >> Repair Instructions >> Hood Latch Replacement - Secondary >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the secondary hood latch assembly to the hood.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the secondary hood latch bolts that retain the latch assembly to the hood.

    Tighten 

    Tighten the secondary hood latch mounting bolts to 25 N.m (18 lb ft).

    Fig 1: Installing Bolts Retaining Latch Assembly To Hood
    G01477537Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals