LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (Bumper System) >> Repair Instructions >> Step Pad Replacement - Rear Bumper (Utility) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a flat-bladed tool in order to pry the step pads upward.
    Fig 1: Using Flat-Bladed Tool To Pry Step Pads Upward
    G01477514Courtesy of GENERAL MOTORS CORP.
  2. Remove the step pads from the bumper.
    Fig 2: Removing Step Pads From Bumper
    G01477515Courtesy of GENERAL MOTORS CORP.