LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (Bumper System) >> Repair Instructions >> Fascia Replacement - Front Bumper (GMC) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front bumper fascia to the vehicle.
  2. Install the push-pin fascia retainers. Ensure that the retainers lock into position.
  3. Install the grille. Refer to GRILLE REPLACEMENT (GMC) or GRILLE REPLACEMENT (CHEVROLET) in Exterior Trim.
    Fig 1: Installing Front Bumper Fascia To Vehicle
    G01477490Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals