Installation Procedure
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Apply rust inhibitor to the plate and body mating surfaces ANTI-CORROSION TREATMENT AND REPAIR .
- Install 1/4 inch rivets using the J 34940.
- Install the rocker cladding to the front lower pickup box. Refer to CLADDING REPLACEMENT -REAR LOWER P/U BOX (XTREME) .
- Lower the vehicle.