LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 543 (Exterior Trim) >> Repair Instructions >> Applique Replacement -Quarter Panel Upper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the molding to the vehicle.
  2. Install the pushpins.
  3. Close the liftgate.
    Fig 1: Installing Molding To Vehicle
    G01477391Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals