LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Automatic Transaxle Servicing) >> Removal & Installation >> Transaxle Brace >> Installation

Transaxle Brace: Installation

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Install the transaxle brace. Hand start the bolts to the engine and to the transaxle. Install the transaxle brace bolts to the transaxle. See Figure . Tighten the transaxle brace bolts to the transaxle to specification. See TORQUE SPECIFICATIONS  . Install the transaxle brace bolts to the engine. Tighten the transaxle brace bolts to the engine to specification. Install the right front wheel. Lower the vehicle. Connect the negative battery cable.

scientia non olet · About LEMON Manuals