LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 538 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the instrument panel cluster to the instrument panel.
  2. Connect the electrical connector to the instrument panel cluster.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the screws to instrument panel cluster.

    Tighten 

    Tighten the screws to 1.9 N.m (17 Ib. in).

  4. Install the instrument panel accessory trim plate.

    Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY .

    Fig 1: Installing Instrument Panel Cluster To Instrument Panel
    G01476643Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals