Removal Procedure
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument panel trim plate. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY .
- Remove ashtray housing retaining screws.
- Move the ashtray housing rearward in order to disconnect the electrical connectors.
- Remove the clip that retains the electrical connectors to the instrument panel.
- Disconnect the electrical connectors.
- Remove the ashtray housing from the instrument panel.