LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 527 (Tires And Wheels) >> Repair Instructions >> Tire Hoist and Shaft Replacement (Pickup) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the spare tire from the tire carrier.
  2. Raise and suitably support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  3. Remove the hoist mounting nuts.
  4. Remove the hoist mounting bolts.
  5. Remove the pin and the retainer.
  6. Remove the hoist from the rear crossmember.
    Fig 1: Tire Hoist
    G01467812Courtesy of GENERAL MOTORS CORP.