Finish Damage Evaluation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Important:

If the wheels are chrome-plated, do not re-plate or refinish the wheels.
If the wheels are polished aluminum, do not refinish the wheels in the dealer environment. Utilize a refinisher that meets manufacturer guidelines.

Inspect the wheels for damage from uncoated wheel balance weights or from automatic car wash facilities.
Inspect the wheels for the following conditions:
- Corrosion
- Scrapes
- Gouges
Verify the damage is not deeper than what sanding can remove.
Inspect the wheels for cracks. If a wheel has cracks, discard the wheel.
Inspect the wheels for bent rim flanges. If a rim flange is bent, discard the wheel.