LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Automatic Transmission - Service Information) >> Removal & Installation >> Transaxle Mount & Bracket >> Installation

Transaxle Mount & Bracket: Installation

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transaxle mount to the transaxle mount frame bracket. Install the transaxle mount lower nuts to the transaxle mount frame bracket. Tighten transaxle mount lower nuts to specification. See TORQUE SPECIFICATIONS  .
  2. Position the transaxle mount to the frame. Install the transaxle mount bracket bolts. See Figure . Start with the forward lower bolt and work clockwise to tighten the transaxle bracket bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Remove the utility stand. Install the transaxle mount upper nuts. See Figure . Tighten the transaxle mount upper nuts to specification. See TORQUE SPECIFICATIONS  .
  4. Install the left engine splash shield. Install the left front tire and wheel. Lower the vehicle.
scientia non olet · About LEMON Manuals