Fluid Filler Tube: Installation
WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
DO NOT place the fluid filler tube seal on the fluid filler tube when installing the tube or damage to the seal will result.
Install the fluid filler tube seal in the transaxle. See Fig 1 . Position the fluid filler tube into the transaxle. Install the fluid filler tube bracket bolt through the fluid filler tube bracket. See Figure . Tighten the fluid filler tube bracket bolt to specification. See TORQUE SPECIFICATIONS . At the top of the filler tube, install the retaining nut to the filler tube the EGR at the top of the filler tube. Install the air cleaner assembly. Inspect for proper fluid level. See CHECKING FLUID LEVEL & CONDITION under LUBRICATION. Inspect for fluid leaks.