LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Automatic Transmission - Service Information) >> Removal & Installation >> Accumulator & 2-1 Manual Servo >> Installation

Accumulator & 2-1 Manual Servo: Installation

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the manual 2-1 band servo cover gasket into the case. Lubricate the manual 2-1 band servo cover gasket with automatic transmission fluid. Install the manual 2-1 band servo. See Figure . Install the manual 2-1 band servo cover. See Figure .
  2. Install the manual 2-1 band servo cover bolts. See Figure . Tighten the bolts to specification. See TORQUE SPECIFICATIONS  . Install the accumulator. Install the lube oil pipe into the case at the lube hole for the front differential carrier internal gear.
  3. Use a flat-blade tool in order to lock the lube oil pipe retainer into the case. Tighten the accumulator attaching bolts to specification. See TORQUE SPECIFICATIONS  .
  4. If removed, install the new filter seal. Install the filter. Install the oil pan. See DRAINING & REFILLING  under LUBRICATION. Lower the vehicle.
scientia non olet · About LEMON Manuals