LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 516 (Engine Mechanical - 4.3L (LU3)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Crankshaft Position (CKP) Reluctor Ring Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine front cover. Refer to Engine Front Cover Replacement   .
  2. Remove the crankshaft position sensor reluctor ring.
    Fig 1: Removing Crankshaft Position Sensor Reluctor Ring
    G01977560Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals