LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 515 (Engine Mechanical - 2.2L (LN2)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Oil Pan Removal

Oil Pan Removal

WARNING: This page is about a different car, the 2003 GMC Sonoma and 2003 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan bolts.
    Fig 1: Removing Oil Pan Bolts
    G01977110Courtesy of GENERAL MOTORS CORP.
  2. Remove the oil pan nuts.
    Fig 2: Removing Oil Pan Nuts
    G01977111Courtesy of GENERAL MOTORS CORP.
  3. Remove the oil pan. Use a narrow putty knife in order to separate the oil pan from the engine block.
    Fig 3: Removing Oil Pan
    G01977112Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil pan rear oil seal.
    Fig 4: Removing Oil Pan Rear Oil Seal
    G01977113Courtesy of GENERAL MOTORS CORP.