LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Interior Trim) >> Repair Instructions >> Door Sill Plate Replacement - End Gate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the endgate door sill plate.
  2. Remove the endgate door sill plate from the endgate sill.
    Fig 1: Removing Procedure Of Door Sill Plate - End Gate (1 Of 2)
    G01518285Courtesy of GENERAL MOTORS CORP.
  3. Remove the endgate sill plate push-in retainers if required.
    Fig 2: Removing Procedure Of Door Sill Plate - End Gate (2 Of 2)
    G01518286Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals