LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Interior Trim) >> Repair Instructions >> Assist Handle And Rear Coat Hook Replacement (Aztek) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connectors.
  2. Install the bulb socket in the lamp assembly.
  3. Position the pull handle.
  4. Install the fasteners (1).

    Tighten 

    Tighten the fasteners to 3 N.m (27 lb in).

    Fig 1: Installing Procedure Of Assist Handle And Rear Coat Hook (Aztek)
    G01518300Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals