LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Seat System) >> Repair Instructions >> Seat Cushion Outer Trim Panel Replacement - Rear Seat (Bucket) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear bucket seat from the vehicle. Refer to SEAT REPLACEMENT - REAR BUCKET  .
  2. Remove the rear screw from the rear seat cushion trim cover.
    Fig 1: Removing Rear Screw From Rear Seat Cushion Trim Cover
    G01518162Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear seat recliner handle.
  4. Remove the rear seat cushion trim cover from the rear seat.
    Fig 2: Removing Rear Seat Recliner Handle
    G01518163Courtesy of GENERAL MOTORS CORP.