LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Seat System) >> Repair Instructions >> Seat Back Pad Replacement - Rear (Bucket) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear seat back pad to the rear seat back frame.
  2. Install the rear seat back cover. Refer to SEAT BACK REPLACEMENT - REAR (SPLIT BENCH)  or SEAT BACK REPLACEMENT - REAR (BUCKET) 
    Fig 1: Installing Rear Seat Back Pad To Rear Seat Back Frame
    G01518254Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals