LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 490 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Lock Cylinder Replacement - Instrument Panel (I/P) Compartment >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the key into the lock cylinder.
  2. Align the lock cylinder in the same position used for removal. Push the cylinder in place to seat fully.
  3. Turn the key counterclockwise to secure the lock cylinder retainer.
  4. Remove the key from the lock cylinder.
  5. Inspect the operation of the lock cylinder. The lock cylinder should only allow a 1/4 turn and should be securely retained in the door handle.
  6. Align and install the I/P compartment handle to the I/P compartment. Refer to HANDLE REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT (AZTEK)  or HANDLE REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT (RENDEZVOUS)  .
  7. Close the I/P compartment door.
    Fig 1: Installing Lock Cylinder
    G01517726Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals