LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 490 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Driver Information Center Switch Replacement (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connecting Electrical Connectors To Driver Information Center Panel.
    Fig 1: Connecting Electrical Connectors To driver information center panel
    G01517738Courtesy of GENERAL MOTORS CORP.
  2. Install the driver information center panel to the instrument panel. Press firmly into place until fully seated.
    Fig 2: Installing Driver Information Center Panel To Instrument Panel
    G01517739Courtesy of GENERAL MOTORS CORP.