LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 490 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Bracket Replacement - Console Floor >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front floor console. Refer to CONSOLE REPLACEMENT - FRONT FLOOR (AZTEK)  or Console Replacement - Front Floor
  2. Remove the upper bolts (2) from the IP.
  3. Remove the lower nuts (1) from the floor.
  4. Remove the front floor console bracket from the floor.
    Fig 1: Removing Front Floor Console Bracket
    G01517802Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals