LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 484 (Automatic Transaxle Diagnosis, Service & Repair - 4T65-E) >> Repair Instructions >> Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the torque converter clutch PWM solenoid (334).
  2. Connect the transaxle wiring harness.
  3. Install the case side cover. Refer to CASE SIDE COVER REPLACEMENT  .
    Fig 1: Installing Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid
    G01501989Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals