LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 484 (Automatic Transaxle Diagnosis, Service & Repair - 4T65-E) >> Repair Instructions >> Final Drive Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the sun gear thrust bearing (698), the differential carrier sun gear (697), the park gear (696), the internal gear thrust bearing (695) and the sun gear shaft (689) into the differential carrier (700).
    Fig 1: Installing Final Drive (1 Of 2)
    G01502026Courtesy of GENERAL MOTORS CORP.
  2. Install the differential carrier into the case.
  3. Install the case extension housing. Refer to CASE EXTENSION HOUSING REPLACEMENT  .
    Fig 2: Installing Final Drive (2 Of 2)
    G01502027Courtesy of GENERAL MOTORS CORP.