LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 483 (Body Control System) >> Diagnostic Information & Procedures >> DTC B1004: KAM In The Module Has Been Reset >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

This DTC indicates the KAM in the module has been reset. It is a normal occurrence when battery positive voltage or ground is removed from the module, such as a battery disconnect.

scientia non olet · About LEMON Manuals